Outlet 🤩 RideTech Bolt-on 4 Link System For 1955-1957 Chevrolet With 2 Piece Frame 11037199 🌟

Muscle cars have always been the backbone of hotrodding, and now they are hotter than ever! The problem is nobody wants to put up with the ride quality, handling, and braking technology of 40 years ago. After driving a new Camaro or Mustang, the compromises of a standard leafspring suspension just doesn’t cut it! Now there is a solution.

This RideTech 4 Link System is specifically desgned for the 1955-1957 Chevy and is desinge for use with Shockwaves or CoilOvers. The ride height of your car is typically lowered by approximately 2″. The ride quality is dramatically improved over stock, so instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.

The area of largest improvement is the handling and cornering performance. The system eliminates the OEM leafspring and replaces them with a 4-Link rear suspension. The 4-Link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a Ridetech Coil-Over front suspension kit your classic musclecar can now enjoy the benefits of modern handling and ride quality technology. The bars are positioned to the inside of the frame rails to provide maximum tire clearance. The installation is virually bolt on requiring only two brackets be welded to the axle tube. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

If you want your classic muscle car to ride and drive like a modern performance car, the Bolt-On 4-Link system is the perfect solution!

4-Link systems have proven time and time again to provide not only ground shaking traction, but a great highway ride as well.